Skip to content
Call or text (608) 927-6750
New red and blue PEX lines through basement floor joists to a manifold, an old rusty galvanized pipe on the floor, and a crimp tool and coil of PEX on a drop cloth

Repiping in Beloit, WI

Updated

Get a free quote

A licensed plumber replies with a price. Nothing is booked until you say yes.

Rather talk? Call (608) 927-6750 or text us.

Short answer

Ready for a price on repiping?

Call, text, or send the form. You get a price back before any work is scheduled.

Repiping replaces the water supply pipes inside the house: the lines from the meter to the water heater and out to every fixture. It is the fix when weak flow, rusty water and repeat leaks come from the pipe itself rather than one fixture. A licensed plumber runs new lines, usually PEX or copper, ties in each fixture and pressure tests the system. If the problem is the buried line from the street, see water line replacement.

Repiping costs

ItemTypical costSource
Whole-house repipe$1,500 to $15,000Angi
Average per fixtureAbout $1,200Angi
PEX pipe, per foot (material)$0.40 to $2Angi
Copper pipe, per foot (material)$2 to $8Angi
Beloit permit, per fixture$7City fee schedule

The spread is house size, number of bathrooms, and how much finished wall and ceiling has to be opened. Patching drywall is often a separate trade. All prices are on the plumber cost page.

Why Beloit has so much old pipe

The city's median home was built in 1957; 27% were built before 1940 and 28% from 1940 to 1959 (ACS 2020-2024). Galvanized steel was the common supply pipe through those decades. It rusts from the inside, which narrows the pipe, colors the water and eventually leaks at the threads. The PSC's 2025 numbers count 1,966 galvanized customer-side service lines in Beloit (PSC), and the pipe inside those houses is often the same age. The galvanized pipe guide explains how to tell.

Signs it is time to repipe

  • Low pressure at every fixture, worse upstairs and when two run at once.
  • Brown or rusty water after the tap sits.
  • More than one leak in a year from different joints.
  • A mix of galvanized and copper with corrosion where they meet.
  • A remodel that already opens the walls.

PEX or copper

PEX is flexible, cheaper per foot and fishes through walls with fewer openings. Copper costs more, lasts, and some owners prefer it exposed in a basement. Beloit's hard water (16 to 23 grains per gallon, 2024 CCR) builds scale in either over time, so a softener is worth pricing at the same visit; see water softener installation.

Code points on a repipe

  • Beloit requires a permit before plumbing work, applied for by a Wisconsin master plumber or an owner-occupant (BMC 8.07), and doubles the fee if work starts first (BMC 8.18).
  • Where supply pressure is over 80 psi a pressure reducing valve is required (SPS 382.40(7)(d)).
  • Water hammer arrestors are required on fixtures with quick-closing solenoid valves (SPS 382.40(8)(f)); a repipe is the time to add them.

The permits guide has the fee table. Repiping is the largest of the regular jobs on the list of Beloit plumbing services.

Where this is done

Repiping across Beloit and the nearby Wisconsin and Illinois towns. Each town page has its own water, sewer and permit rules; the full list is on the service area page.

Common questions

Repiping: questions

How much does it cost to repipe a house?

Typically $1,500 to $15,000 in national 2026 guides, about $7,500 on average and roughly $1,200 per fixture. See the cost page.

Is PEX or copper better for repiping?

PEX is cheaper and needs fewer wall openings; copper costs more and many owners like it exposed in a basement. Both are approved; ask the plumber which suits the house.

How do I know if my Beloit house has galvanized pipes?

Galvanized pipe is dull gray steel with threaded fittings; a magnet sticks to it. It was common in homes from the 1940s and 1950s, and a large share of Beloit's homes date from then.

Do I need a permit to repipe in Beloit?

Beloit's plumbing code requires a permit before plumbing work. The 2026 fee schedule lists a $50 filing fee plus $7 per fixture, doubled if work starts before the permit.

How long does a whole-house repipe take?

It depends on size and access. Many plumbers keep water on overnight between days of work; ask how long you will be without it.

Will repiping fix low water pressure?

If the cause is corroded galvanized pipe, new pipe restores the full bore. If every house on the street is low, the issue is the supply, not your pipe.

Repiping: get a written price

Describe the problem and the town. A licensed plumber replies with a price, and no work starts until you agree to it.

Prices and the full service list are on the homepage for a plumber in Beloit.