
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Ready for a price on faucet and shower repair?
Call, text, or send the form. You get a price back before any work is scheduled.
A drip is the cheapest plumbing problem to fix and one of the most ignored. A licensed plumber replaces the cartridge, stem or seats in an existing faucet, or swaps the faucet when parts are no longer made, and checks the shut-off valves under the sink while the water is off. If the drip is in a shower or tub, the valve is behind the wall and that is a bigger job.
Faucet and fixture costs
| Job | Typical cost | Source |
|---|---|---|
| Faucet replacement | $150 to $600 | Angi |
| Bathroom faucet labor only | $170 to $360 | Angi |
| Toilet repair (for comparison) | $100 to $300 | Angi |
| Plumber, per hour | $45 to $200 | Angi |
Typical U.S. ranges from 2026 cost guides. Seized shut-off valves, a corroded supply line or a faucet bought without matching holes in the sink or counter add time. Every price is on the plumber cost page.
Hard water and Beloit faucets
Beloit's wells deliver water at 280 to 400 mg/L hardness (2024 water quality report). Scale collects on aerator screens, cartridge seals and shower heads, so flow drops and seals stop seating. Cleaning the aerator fixes a weak stream; a faucet that drips after it is shut off firmly usually needs a cartridge. A softener slows the wear on every fixture in the house; see water softener installation and the hard water guide.
Pressure, banging and drips
A faucet that drips again soon after a repair can be a pressure problem, not a faucet problem. Wisconsin's plumbing code requires a pressure reducing valve where supply pressure exceeds 80 psi (SPS 382.40(7)(d)), and it requires water hammer arrestors on fixtures with quick-closing solenoid valves, such as washing machines and dishwashers (SPS 382.40(8)(f)). The water pressure guide and the water hammer guide explain both.
A dripping or leaking shower
A shower head that keeps dripping after the handle is off, a handle that turns too far, or water that never gets hot all point at the valve cartridge behind the trim. On most single-handle showers a plumber pulls the trim, replaces the cartridge and balances the temperature stop without opening the wall. Water stains on the ceiling below a shower, or a soft spot in the wall around it, mean a leak at the valve body or the drain instead, and the wall has to be opened from behind or through an access panel. An older national guide puts a shower valve at $20 to $350 for the part and $110 to $750 with labor (Forbes Home, 2023); scale from Beloit's hard water is a common reason cartridges stick. If the problem is a slow shower drain rather than a leak, see drain cleaning.
Repair or replace
- Repair when the faucet is a known brand, parts are available and the finish is sound.
- Replace when the body is corroded, parts are discontinued, or it is part of a remodel.
- Always look at the shut-offs. Old multi-turn valves tend to fail when they are finally used.
Who may do the work
Wisconsin exempts minor repairs to faucets, valves, pipes and appliances from the plumbing license requirement (Wis. Stat. 145.06(4)(d)), so a homeowner can change a cartridge. A new fixture is plumbing work under Beloit's code, which requires a permit before work starts and lists $7 per fixture plus a $50 filing fee (2026 fee schedule). The homeowner plumbing law guide covers the rest. In South Beloit, Illinois rules apply instead.
Fixture work is quick to add to another visit, such as a toilet repair, and part of the full list of Beloit plumbing services.
Sources: Angi, bathroom faucet replacement cost; Angi, plumber cost guide; Forbes Home, cost to replace a shower valve; City of Beloit 2024 Consumer Confidence Report; Wis. Admin. Code SPS 382.40(7)(d), pressure reducing valves over 80 psig; Wis. Admin. Code SPS 382.40(8), water services, frost depth and water hammer; Wis. Stat. 145.06, plumbing licenses and exemptions; City of Beloit 2026 Schedule of Fees
Where this is done
Faucet and Shower Repair across Beloit and the nearby Wisconsin and Illinois towns. Each town page has its own water, sewer and permit rules; the full list is on the service area page.
Common questions
Faucet and Shower Repair: questions
How much does a plumber charge to replace a faucet?
Typically $150 to $600, with bathroom faucet labor alone at $170 to $360, in national 2026 guides. See the cost page.
Why does my faucet keep dripping after I shut it off?
A worn cartridge, stem washer or seat. In Beloit, hard water scale on the seals speeds that up. If it returns soon after a repair, check the water pressure.
Can I fix my own faucet in Wisconsin?
Wisconsin law exempts minor repairs to faucets, valves, pipes and appliances from the plumbing license requirement, so changing a cartridge is allowed.
Do I need a permit to install a new faucet in Beloit?
Beloit's code requires a permit before plumbing work, and the 2026 fee schedule lists $7 per fixture plus a $50 filing fee. Call (608) 364-6700 to confirm what a like-for-like swap needs.
Why is my faucet flow weak?
Usually a scaled aerator screen. Unscrew it, soak it in vinegar and rinse it. If every fixture is weak, the problem is upstream, often old galvanized pipe.
Should I repair or replace an old faucet?
Repair when parts are available and the body is sound. Replace when it is corroded, discontinued, or part of a remodel.
Why does my shower keep dripping after I turn it off?
The valve cartridge behind the handle is worn or scaled. On most single-handle showers a plumber can swap it from the front without opening the wall; an older national guide puts a shower valve job at $110 to $750 with labor. See the cost page.
Other services
Faucet and Shower Repair: get a written price
Describe the problem and the town. A licensed plumber replies with a price, and no work starts until you agree to it.
Prices and the full service list are on the homepage for a plumber in Beloit.
