
Toilet Repair and Installation in Beloit, WI
Updated
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Ready for a price on toilet repair and installation?
Call, text, or send the form. You get a price back before any work is scheduled.
Most toilet problems are one of four things: it runs, it leaks at the base, it rocks, or it clogs. A licensed plumber can usually fix the first three in one visit with parts on the truck, and clears the fourth with an auger. A clog that keeps coming back, or that brings water up in the tub, is a line problem; see drain cleaning.
Toilet repair and installation costs
| Job | Typical cost | Source |
|---|---|---|
| Toilet repair (flapper, fill valve, wax ring) | $100 to $300 | Angi |
| Toilet clog | $110 to $275 | Angi |
| New toilet installed (labor) | $224 to $533 | Angi |
| Installation, project total | $300 to $800 | Angi |
Typical U.S. ranges. A cracked flange, a rotted subfloor or an odd rough-in measurement in an old house is what adds to the bill. Every price is on the plumber cost page.
A running toilet
Water that keeps trickling into the bowl means the flapper is not sealing or the fill valve is not shutting off. Beloit's water measures 280 to 400 mg/L hardness (2024 water quality report), and mineral scale on the flapper seat and inside the fill valve is a common reason these parts quit early. A running toilet is also one of the most common causes of a high water bill.
Leaking at the base or rocking
Water around the base usually means a failed wax ring, often because the toilet rocked and broke the seal. In Beloit's older homes (median year built 1957, ACS 2020-2024) the flange may be cast iron bolted to old lead or cast iron drain pipe, and a corroded flange has to be repaired before a new ring will hold. Leave a rocking toilet unused until it is reset; a slow leak into the subfloor does more damage than a visible puddle.
Replacing a toilet
- Measure the rough-in (wall to the center of the bolts). Most are 12 inches; old houses vary.
- Check the shut-off valve. Old multi-turn valves often fail when touched and should be replaced at the same time.
- New supply line, wax ring or wax-free seal, and closet bolts every time.
- The old toilet is usually hauled away as part of the job; ask.
Permits and who may do the work
Beloit's plumbing code requires a permit before plumbing work, applied for by a Wisconsin master plumber or the owner-occupant of a single-family home (BMC 8.07), and the 2026 fee schedule lists $7 per fixture plus the $50 filing fee (fee schedule). State law exempts minor repairs to faucets, valves and pipes from the license requirement (Wis. Stat. 145.06(4)(d)). The homeowner plumbing law guide explains where the line sits. Across the state line in Roscoe and Rockton, Illinois licensing applies instead.
Toilets are among the most common small jobs on the list of Beloit plumbing services, and easy to add to another visit, such as a faucet repair.
Sources: Angi, plumber cost guide; Angi, drain cleaning cost; Angi, toilet installation cost; City of Beloit 2024 Consumer Confidence Report; U.S. Census Bureau, ACS 2020-2024 5-year, table B25034, via Census Reporter; Beloit Code of Ordinances, ch. 8 plumbing and ch. 29 sewers (Municode); City of Beloit 2026 Schedule of Fees; Wis. Stat. 145.06, plumbing licenses and exemptions
Where this is done
Toilet Repair and Installation across Beloit and the nearby Wisconsin and Illinois towns. Each town page has its own water, sewer and permit rules; the full list is on the service area page.
Common questions
Toilet Repair and Installation: questions
How much does a plumber charge to fix a toilet?
A toilet repair typically runs $100 to $300 and a new toilet install $224 to $533 in national 2026 guides. See the cost page.
Why does my toilet keep running?
The flapper is not sealing or the fill valve is not shutting off. Beloit's hard water leaves scale on both, which is a common reason they fail early.
What causes water around the base of a toilet?
Usually a failed wax ring, often from a toilet that rocks. In older homes a corroded flange may need repair before a new seal will hold.
Do I need a permit to replace a toilet in Beloit?
Beloit's plumbing code requires a permit before plumbing work; the 2026 fee schedule lists $7 per fixture plus a $50 filing fee. Call Planning and Building Services at (608) 364-6700 to confirm what a like-for-like swap needs.
Can I replace my own toilet in Wisconsin?
An owner-occupant may do plumbing in their own single-family home under Wis. Stat. 145.06(4). Renters and landlords of other buildings need a licensed plumber.
Should I replace the shut-off valve too?
Old multi-turn valves often leak or break when they are finally used. Replacing it while the toilet is off costs little extra.
How long does a toilet replacement take?
Usually a couple of hours for a straightforward swap. A damaged flange or subfloor adds time.
Other services
Toilet Repair and Installation: get a written price
Describe the problem and the town. A licensed plumber replies with a price, and no work starts until you agree to it.
Prices and the full service list are on the homepage for a plumber in Beloit.
