
Permits for Water Heaters and Pipe Work in Beloit
Updated
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Part of Repiping.
Anything that opens up pipe, from a water heater swap to a whole-house repiping, runs into the permit question first. This guide explains what the City of Beloit's code says, who can apply, what the fees are and who to call. The plumber cost page lists job prices; the fees here are separate from what the plumber charges.
Does Beloit require a plumbing permit for a water heater?
The Beloit plumbing code requires a permit before any plumbing work is done in the City (BMC 8.07). The exceptions listed in the code are limited to private onsite wastewater systems and utility work (Beloit Code of Ordinances). The code does not name water heaters. A water heater replacement falls under the general rule, but the City's plumbing code requires a permit before any plumbing work, and the way to confirm what your job needs is to call Planning and Building Services at (608) 364-6700. A plumber who does this work regularly will know how the City treats a like-for-like swap and will normally pull the permit for you.
Who may apply for a plumbing permit in Beloit
The code states that the permit application must be filled out by a Wisconsin master plumber or by the owner and occupant of a single-family residence where the work will be done. That matches the state exemption for owner-occupied one-family homes, and the City's license ordinance also lets an owner-occupant do plumbing in their own single-family home (BMC 8.06 and 8.07). Applications go to permits@beloitwi.gov, and the permit office phone is (608) 364-6700 (City of Beloit permits). The owner is responsible for maintaining the plumbing and drainage systems on the property, which includes work done without a plumber.
If you are thinking of doing the work yourself, read can you do your own plumbing in Wisconsin first. Several jobs, such as work on the connection to the City sewer, need a licensed plumber even for an owner.
Beloit plumbing permit fees
The City's 2026 Schedule of Fees lists the plumbing permit charges under BMC 8.18 (City fee schedule). There is no separate water heater line. The fixture and appliance charge is the one that would apply to a heater, but ask the City to confirm.
| Item | Fee | Note |
|---|---|---|
| Plumbing permit application filing fee | $50 | Doubles if work starts before approval (BMC 8.18) |
| Each fixture, water meter, appliance or appurtenance | $7 each | Per item |
| Each sewer or water lateral, new, relay or repair | $30 each | Per item |
| Reduced pressure backflow preventer | $20 each | Per item |
| Sewer backwater valve | $7 each | Per item |
To show how the pieces add up, a permit with the $50 filing fee and one appliance at $7 comes to $57. A job with more fixtures adds $7 for each. This is arithmetic from the fee table, not a quote from the City, and what counts as a fixture or appliance is the City's call.
What happens if work starts before the permit
The code says a person who fails to get a required plumbing permit before starting the work pays double the normal permit fee (BMC 8.18). The City's fee schedule repeats it: the filing fee doubles for work started prior to approval. On a $50 filing fee that adds $50 and the rest of the permit charges double too. If a plumber tells you the permit is handled, ask to see the permit number.
Permits for pipe work: repiping and sewer laterals
A repipe means many fixtures and many pipe runs, so the fixture charge adds up. A sewer or water lateral, new, relay or repair, is $30 each, and a reduced pressure backflow preventer is $20. If a job goes into the street, the City charges a street cut fee as well; see who owns the sewer lateral in Beloit for those figures. For whole-house repiping prices and how a quote builds, see the cost page.
Questions to ask the permit office
A short call to Planning and Building Services avoids most delays. Have the address, the type of work and who will do it ready, then ask these.
- Does this job need a plumbing permit, and what does the City count as a fixture or appliance for the fee?
- Does an inspection follow, and how is it scheduled?
- If I am the owner and occupant, can I apply myself, or does this work have to go through a master plumber?
- Is there any additional fee for this address, such as a street cut or a water utility charge?
Keep the permit number and the inspection record with your house papers. A buyer or an insurance company may ask for proof later, and a job done without a permit can turn into a problem at sale time.
Outside the City: Town of Beloit, Clinton, Orfordville
The City's permit rules apply inside City limits. The Town of Beloit issues permits through its own Community Development office and building inspector (Town of Beloit permitting), and whether a like-for-like water heater swap needs a permit there was not confirmed. The Village of Clinton uses a building inspector and takes forms at the Village hall (Village of Clinton), and the Village of Orfordville posts a building permit page (Orfordville permit page). None of these three publishes a plumbing permit rule for water heaters that was found, so call the local office before the work.
What an inspection looks for
Once a permit is issued, an inspector may check the finished work against the plumbing code, which in Wisconsin is SPS 382 (SPS 382). For a water heater that means the relief valve, the discharge pipe, the expansion device and the connections. For pipe work it means support, slope, joints and venting. If work is covered before it is inspected, the inspector can require it to be opened up again, so do not close a wall until the inspection is done.
Illinois towns work differently
Across the state line, South Beloit, Rockton and Roscoe follow Illinois rules and their own village or city offices. Rockton, for example, issues a water and sewer permit for connections, with an inspection before the pipe is covered (Village of Rockton permit). Illinois plumbing also requires an Illinois license, which a Wisconsin license does not replace. Check with the local office before you assume a Beloit rule applies on that side of the line.
Sources: Beloit Code of Ordinances, ch. 8 plumbing and ch. 29 sewers (Municode); City of Beloit, Planning and Building Services permits; City of Beloit 2026 Schedule of Fees; Wis. Admin. Code SPS 382, plumbing design and installation; Town of Beloit, permitting and inspections; Village of Clinton, building inspection and zoning; Village of Orfordville, building permit FAQ; Village of Rockton, water and sewer permit
Want a price for your own house?
Call, text, or send the form. You get a price back before any work is scheduled.
Quick answers
Do I need a permit to replace a water heater in Beloit?
The City's plumbing code requires a permit before any plumbing work, and it does not name water heaters. Call Planning and Building Services at (608) 364-6700 to confirm what your job needs. A licensed plumber usually pulls the permit.
How much is a plumbing permit in Beloit?
The City charges a $50 filing fee plus $7 for each fixture, water meter, appliance or appurtenance, and $30 for each sewer or water lateral. The City's 2026 fee schedule lists them, and the cost page shows job prices that these fees come on top of.
Can a homeowner pull their own plumbing permit in Beloit?
The owner and occupant of a single-family residence may fill out the application for work on their own home. Anyone else must be a Wisconsin master plumber. Work on the connection to the City sewer still needs a licensed plumber.
What happens if I start plumbing work before getting a permit?
Beloit's code charges double the normal permit fee when work starts before the permit. The City fee schedule says the filing fee doubles for work started before approval. Get the permit first to avoid it.
Where do I send a plumbing permit application in Beloit?
Applications go to permits@beloitwi.gov, and the office phone is (608) 364-6700. The office is Planning and Building Services.
Do the Town of Beloit and Illinois towns use the same permits?
The Town of Beloit permits through its own building inspector, and Illinois towns such as South Beloit, Rockton and Roscoe use their own offices and Illinois law. Call the local office, since the City of Beloit's fee table does not apply outside City limits.
Want a plumber to look at it?
Describe the problem and the town. A licensed plumber replies with a price before any work starts.
Prices and the full service list are on the homepage for a plumber in Beloit.
