
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Ready for a price on backflow testing?
Call, text, or send the form. You get a price back before any work is scheduled.
A backflow preventer keeps water that has left the public system from being pulled back into it. Lawn sprinklers, boilers, fire sprinklers, and commercial equipment all connect drinking water to something that should never flow backward. Testable assemblies have to be checked on a schedule by a credentialed tester, who files the result. A licensed plumber installs or repairs the assembly; a registered tester certifies it.
The Wisconsin testing rule
Wisconsin's plumbing code requires a performance test of testable cross connection control assemblies at installation, after any repair, and at least annually, by a tester registered under SPS 305.99 (SPS 382.22(8)(b)). The separate section SPS 382.41 sets where protection is required (SPS 382).
Beloit fees for backflow and sprinkler work
| City fee | Amount |
|---|---|
| Plumbing permit application filing fee | $50 (Doubles if work starts before approval (BMC 8.18)) |
| Each fixture, water meter, appliance or appurtenance | $7 each |
| Reduced pressure backflow preventer | $20 each |
From the City's 2026 Schedule of Fees (fee schedule), which also lists $25 plus $0.25 a head for a lawn or fire protection sprinkler system. Permits go through Planning and Building Services at permits@beloitwi.gov or (608) 364-6700 (City permits page).
Typical costs
We did not find a dated national guide for the test itself, so no test price is given here. A backflow preventer device runs $200 to $1,000 in an older national guide (HomeGuide, 2024). Other plumbing prices are on the plumber cost page.
Rules across the state line
- Illinois requires RPZ, RPDA, DCA and DCDA assemblies to be tested and approved by a Cross-Connection Control Device Inspector before first use and at least annually (77 Ill. Adm. Code 890.1130).
- Rockton runs a cross connection control program with annual backflow testing (Village of Rockton).
- Orfordville posts the DNR residential cross-connection hazard form on its public works page (Village of Orfordville).
Where homes have backflow assemblies
- Underground lawn sprinkler systems.
- Boilers and hydronic heating with a fill connection.
- Fire sprinkler systems in larger homes and multi-unit buildings.
- Pools, ponds and some water treatment equipment.
High pressure and water hammer can damage an assembly; the water pressure guide explains the 80 psi rule. If a test fails, the repair and retest are plumbing work under permit, and the license check guide shows how to confirm credentials. Backflow work is part of the full list of Beloit plumbing services, along with leak detection.
Sources: Wis. Admin. Code SPS 382.22(8), testing cross connection control assemblies; Wis. Admin. Code SPS 382, plumbing design and installation; City of Beloit 2026 Schedule of Fees; City of Beloit, Planning and Building Services permits; HomeGuide, backflow preventer cost; 77 Ill. Adm. Code 890.1130, backflow assembly testing; Village of Rockton, water and sewer; Village of Orfordville, public works
Where this is done
Backflow Testing across Beloit and the nearby Wisconsin and Illinois towns. Each town page has its own water, sewer and permit rules; the full list is on the service area page.
Common questions
Backflow Testing: questions
How often does a backflow preventer need testing in Wisconsin?
At installation, after any repair, and at least once a year, by a tester registered with the state under SPS 305.99.
Who can test a backflow preventer in Wisconsin?
A cross connection control tester registered under SPS 305.99. A licensed plumber installs and repairs assemblies; the registered tester certifies them.
What does Beloit charge for a backflow permit?
The 2026 fee schedule lists $20 for a reduced pressure backflow preventer plus the $50 permit filing fee. Lawn and fire sprinkler systems are $25 plus $0.25 a head.
Does my lawn sprinkler need a backflow preventer?
Lawn irrigation connects drinking water to soil and fertilizer, which is the classic cross connection, so a protective assembly is standard. Ask the installer which type the code requires.
What are the backflow rules in Illinois towns near Beloit?
Illinois requires RPZ, RPDA, DCA and DCDA assemblies to be tested by a Cross-Connection Control Device Inspector before first use and at least annually. Rockton runs its own annual testing program.
How much does a backflow preventer cost?
An older national guide puts the device at $200 to $1,000. We did not find a current dated price for the annual test. Other prices are on the cost page.
Other services
Backflow Testing: get a written price
Describe the problem and the town. A licensed plumber replies with a price, and no work starts until you agree to it.
Prices and the full service list are on the homepage for a plumber in Beloit.
