
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
No plumber in Beloit publishes a price list, and no government agency tracks what local plumbers charge, so this page uses the most recent national cost guides (all updated in 2026 unless noted) for job prices and the City of Beloit's own 2026 fee schedule for permits. Each range names its source. A licensed plumber gives the price for your house in writing before any work is scheduled; if it lands outside these ranges, ask why. The short version of each job is on the Beloit plumbing homepage.
Every plumbing price on one page
Labor and service calls
| Job | Typical cost | What the source says | Source |
|---|---|---|---|
| Plumber, per hour | $45 to $200 per hour | Apprentice $45 to $90, journeyman $60 to $110, master $80 to $200 an hour. | Angi |
| Service call or trip charge | $150 to $250 per visit | What to budget for a visit before any work. | Angi |
| After-hours or emergency rate | $100 to $500 per hour | 1.5 to 3 times the normal rate, about $170 an hour on average, up to $600 an hour on holidays. | Angi |
The rate depends on who comes: apprentices bill less than masters. Wisconsin requires a licensed master plumber in charge of installations (Wis. Stat. 145.06), which is part of what a shop's rate pays for. The hourly rate guide compares customer rates with BLS wages.
Drains and sewers
| Job | Typical cost | What the source says | Source |
|---|---|---|---|
| Drain cleaning, one clog | $147 to $352 | Average $246. Toilet $110 to $275, kitchen sink $110 to $215. | Angi |
| Main sewer line cleaning | $99 to $1,600 | Average about $380. | Angi, Angi |
| Hydro jetting | $350 to $600 | Average $475. | Angi |
| Sewer camera inspection | $271 to $1,725 | A standard camera run is $150 to $300; the high end includes locating and longer lines. | Angi |
| Sewer line spot repair | $1,100 to $4,100 | Average about $2,600. | Angi |
| Sewer line replacement | $1,388 to $5,323 | Average $3,319; $60 to $250 per foot for a full replacement, about $150 a foot on average. | Angi |
A single clog is cheap; a main line that keeps clogging is a camera run and maybe a repair. In Beloit the lateral is the owner's (BMC 29.04), so the whole bill is yours. See drain cleaning, sewer camera inspection and sewer line repair.
Water heaters
| Job | Typical cost | What the source says | Source |
|---|---|---|---|
| Water heater repair | $150 to $750 | Thermocouple, element, thermostat, valve and similar repairs. | Angi |
| Tank water heater, installed | $881 to $1,826 | Average $1,348 for a standard tank, 40 or 50 gallons. | HomeAdvisor |
| Tankless water heater, installed | $1,404 to $3,904 | Average $2,641. | Angi |
| Heat pump water heater, installed | $3,200 to $4,700 | Average $4,200. | Angi |
Gas venting changes and electric service upgrades are the usual extras: HomeGuide lists new gas venting at $500 to $1,500 and an electric-to-gas conversion at $400 to $2,000 or more (HomeGuide). See water heater replacement and tankless water heaters.
Pipes, leaks and water lines
| Job | Typical cost | What the source says | Source |
|---|---|---|---|
| Leaking pipe repair | $150 to $350 | Finding the leak adds about $100. | HomeAdvisor |
| Burst pipe repair | $1,000 to $4,000 | The plumbing repair itself, before any drywall or water cleanup. | Angi |
| Whole-house repipe | $1,500 to $15,000 | Average $7,500; about $1,200 per fixture on average. | Angi |
| Water service line replacement | $647 to $2,835 | Average $1,703; $50 to $150 per foot, up to about $5,000 deep or obstructed. | Angi |
Leaks inside finished walls cost more to reach than the repair itself. The buried line from the curb stop to the house is the owner's in Beloit (City of Beloit). See leak detection, burst pipe repair, repiping and water line replacement.
Fixtures, sump pumps and water treatment
| Job | Typical cost | What the source says | Source |
|---|---|---|---|
| Toilet repair | $100 to $300 | Flapper, fill valve, wax ring and similar repairs. | Angi |
| Toilet installation | $224 to $533 | Average $374 for the install. | Angi |
| Faucet replacement | $150 to $600 | Bathroom faucet labor alone $170 to $360. | Angi |
| Garbage disposal installation | $200 to $625 | Average $550; $150 to $950 at the extremes. | HomeAdvisor |
| Sump pump replacement | $309 to $755 | Average $531, same pit, same discharge. | Angi |
| New sump pump and pit | $800 to $3,000 | Pedestal $800 to $1,500, submersible $1,200 to $3,000. | Angi |
| Battery backup sump pump | $600 to $1,200 | Average $900. | Angi |
| Water softener, installed | $200 to $6,000 | Average $1,500 installed; labor alone $150 to $1,000. | Angi |
Small jobs are cheapest when combined into one visit. See toilet repair, faucet repair, garbage disposal installation, sump pump installation and water softener installation.
Want a price for your own house?
Call, text, or send the form. You get a price back before any work is scheduled.
City of Beloit fees that land on a plumbing job
These come from the City's 2026 Schedule of Fees, updated December 15, 2025. Permit applications go to Planning and Building Services at permits@beloitwi.gov or (608) 364-6700 (City permits page).
| Fee | Amount | Note |
|---|---|---|
| Plumbing permit application filing fee | $50 | Doubles if work starts before approval (BMC 8.18) |
| Each fixture, water meter, appliance or appurtenance | $7 each | |
| Each sewer or water lateral, new, relay or repair | $30 each | |
| Reduced pressure backflow preventer | $20 each | |
| Sewer backwater valve | $7 each | |
| Street cut for plumbing, asphalt street | $15 per sq ft, $430 minimum | Plus $100 from November 1 to April 1 |
| Street cut for plumbing, concrete street | $21.50 per sq ft, $641 minimum | Plus $100 from November 1 to April 1 |
| Water valve turn-on at the curb | $30 (7 a.m. to 4 p.m.), $50 other hours | Water utility |
| New water lateral installation charge, 1 inch or smaller | $3,900 | Water utility, new connections |
Sources: City of Beloit 2026 Schedule of Fees; Beloit Code of Ordinances, ch. 8 plumbing and ch. 29 sewers (Municode)
How the fees add up on common jobs
- Water heater swap: the $50 filing fee plus $7 for the appliance, if the City treats your swap as permitted work (its plumbing code requires a permit before plumbing work; call to confirm).
- New toilet and two faucets: $50 plus three fixtures at $7 each.
- Sewer lateral repair on your lot: $50 plus $30 for the lateral.
- The same repair under an asphalt street in January: add at least $430 for the street cut and $100 for the November 1 to April 1 period.
- Any of the above started before the permit: double (BMC 8.18).
What pushes a Beloit plumbing bill up
Old houses
Beloit's median home was built in 1957, and 55% of homes in the city were built before 1960 (Census ACS 2020-2024). Old cast iron drains, galvanized supply pipe, seized shut-off valves and corroded toilet flanges turn a simple swap into a longer job. When a plumber quotes extra for "old pipe," ask to see it; the galvanized pipe guide shows what to look for.
Hard water
At 16 to 23 grains per gallon (City 2024 water quality report), scale shortens the life of water heaters, faucet cartridges and toilet valves, so repairs come around sooner. A softener at $200 to $6,000 installed is a cost that saves others; see the hard water guide.
Winter
Beloit averages 13.3 days a year at or below 0°F (NOAA). Frozen and burst pipes arrive on the coldest nights, when after-hours rates apply, and digging a sewer or water line from November through March costs more: frozen ground plus the City's $100 winter street-cut charge.
Access
Finished basements, pipes inside plaster walls, a water heater in a closet, a lateral under a driveway: anything that has to be opened and closed again adds labor. Ask whether the price includes patching, or whether that is a separate trade.
Permits and inspections
The permit itself is small next to the job, but it takes scheduling, and a job started without one costs double in Beloit. A permit also means an inspector checked the work, which matters when you sell.
How plumbers price: hourly or flat
Some plumbers bill time and materials at an hourly rate; many price common jobs flat (a water heater swap, a toilet set, a drain cleared). Flat is easier to compare. Either way, ask what is included: the trip charge, haul-away of the old fixture, the permit, and a camera run after a main-line cleaning. Wages give a sense of the labor share: the median plumber in the Janesville-Beloit metro earns $38.01 an hour, against $39.04 statewide and $30.67 nationally (BLS, May 2025). A shop's rate also covers the truck, insurance, licensing and time between jobs.
Ways to keep the bill down
- List every small problem in one request so one trip charge covers all of them.
- Know where your main shut-off is before you need it (shut-off guide).
- Replace a water heater on your schedule, not after it floods the basement.
- Keep pipes from freezing in the first place (freeze guide).
- Check for help before a lead line replacement: Beloit runs a grant program (lead service line replacement).
- For heat pump water heaters, check Focus on Energy's listed discount first; the federal 25C credit ended for equipment placed in service after 2025 (IRS).
Red flags in a plumbing quote
- No license number, or an Illinois-only license for a Wisconsin job (or the other way around).
- "You don't need a permit for that" on work Beloit's code says needs one.
- A price far below these ranges with no written scope.
- Pressure to replace a whole sewer line without showing camera footage.
- Cash only, no written quote, or a large deposit before any materials are bought.
The license check guide shows how to verify a plumber in both states.
Plumbing cost questions
How much do plumbers charge per hour in Beloit?
National 2026 guides put plumbers at $45 to $200 an hour: apprentices $45 to $90, journeymen $60 to $110 and masters $80 to $200. The plumber's own median wage in the Janesville-Beloit metro is $38.01 an hour (BLS, May 2025).
What does a plumber charge just to come out?
National guides tell homeowners to budget $150 to $250 for a service call, and some plumbers add a $50 to $300 trip fee for addresses outside their usual area. Ask whether the call fee is credited toward the repair.
How much for a plumber for 3 hours?
At $45 to $200 an hour, three hours of labor runs roughly $135 to $600 before parts, plus any service call. Many plumbers price common jobs flat instead, so ask for the total, not the rate.
How much is a water heater replacement in Beloit?
A standard 40 or 50 gallon tank typically costs $881 to $1,826 installed, a tankless unit $1,404 to $3,904 and a heat pump tank $3,200 to $4,700. Beloit's permit adds a $50 filing fee plus $7 per appliance.
How much does sewer line replacement cost in Beloit?
A full lateral replacement typically runs $1,388 to $5,323, or $60 to $250 a foot, and a spot repair $1,100 to $4,100. Work under a Beloit street adds a street-cut fee of $15 a square foot with a $430 minimum on asphalt, plus $100 from November 1 to April 1.
Are emergency plumbers more expensive?
National guides put after-hours rates at 1.5 to 3 times the normal rate, about $170 an hour on average and up to $600 an hour on holidays. If water can be shut off safely, a next-morning visit usually costs less.
What does a plumbing permit cost in Beloit?
The City's 2026 fee schedule lists a $50 filing fee, $7 per fixture or appliance, $30 per sewer or water lateral and $20 for a reduced pressure backflow preventer. The fee doubles if work starts before the permit.
Why are these national prices and not Beloit prices?
No Beloit plumber publishes a price list, and no government source tracks local plumbing prices. The ranges come from national cost guides updated in 2026; the City fees are Beloit's own. Your price comes back in writing before work is booked.
Get a price for your plumbing job
Describe the problem and the town. A licensed plumber replies with a price before any work is scheduled.
Prices and the full service list are on the homepage for a plumber in Beloit.
