
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Clinton at a glance
- Drinking water
- Clinton Water Utility, groundwater (PSC regulated)
- Wastewater
- Village sanitary sewer, Clinton Wastewater Treatment Facility
- Plumbing permits
- Village building inspector (608) 931-6759
- Hardness
- Not published in the village report
- License needed
- Wisconsin DSPS license (Wis. Stat. 145.06)
- Built before 1940
- 27%
Clinton is the village about 10 miles east of Beloit on Highway 140. It has its own water and sewer, its own inspector and its own paperwork, so a plumbing job here starts with Village Hall at (608) 676-5304 rather than Beloit's offices. The full list of services is on the main Beloit plumbing page.
Water in Clinton
The Clinton Water Utility is a PSC-regulated groundwater system, and the village posts its consumer confidence report online (Clinton water report). Unlike Beloit's report, it does not print a hardness figure, so test at the tap before sizing a softener. The village has published a service line inventory and lead and copper plan updates in 2023, 2024 and 2026, and says lead service lines were used only in the 1920s and 1930s. With 27% of homes built before 1940, those are exactly the houses to check; see lead service line replacement and water line replacement.
Sewer in Clinton
The village sewer drains to the Clinton Wastewater Treatment Facility at 809 Punzel Drive, whose DNR discharge permit was up for reissue in February 2026 (DNR notice). Water and sewer are billed together by the village. Clear water from sump pumps and downspouts may not connect to a sanitary drain under state code (SPS 382.36), which matters to a small plant. Lateral ownership was not stated on the village pages we checked; ask before a sewer line repair.
Permits in Clinton
The village building inspector is at (608) 931-6759, and permit forms go to the clerk at 301 Cross Street; plan on up to 14 days for review (Village building and zoning page). Plumbing still needs a Wisconsin-licensed plumber unless an owner is working in the one-family home they live in (Wis. Stat. 145.06).
Housing in Clinton
| Census, ACS 2020-2024 | Clinton | Rock County |
|---|---|---|
| Housing units | 858 | 71,109 |
| Median year built | 1969 | 1970 |
| Built before 1940 | 27% | 19% |
| Built before 1960 | 41% | 37% |
(Census ACS.) The pre-1940 share is the standout: older than the county as a whole, with the plaster walls, cast iron stacks and stone or block basements that make repiping and drain work slower.
Typical plumbing costs in Clinton
- Plumber, per hour: $45 to $200.
- Water heater, standard tank installed: $881 to $1,826.
- Whole-house repipe: $1,500 to $15,000.
Typical U.S. ranges from 2026 cost guides (Angi, HomeAdvisor, Angi). Every price is on the plumber cost page.
Sources: Village of Clinton, water utility confidence report; Wisconsin DNR, Clinton wastewater treatment facility permit notice; Village of Clinton, building inspection and zoning; Wis. Admin. Code SPS 382.36, clearwater and stormwater to sanitary drains; Wis. Stat. 145.06, plumbing licenses and exemptions; U.S. Census Bureau, ACS 2020-2024 5-year, table B25034, via Census Reporter; Angi, plumber cost guide; HomeAdvisor, water heater installation cost; Angi, cost to repipe a house
Need a plumber in Clinton?
Call, text, or send the form with the problem and your street. You get a price before any work starts.
Clinton plumbing questions
Who supplies water in Clinton, WI?
The Clinton Water Utility, a PSC-regulated groundwater system run by the village. Its consumer confidence report is posted on the village website.
How hard is Clinton's water?
The village report does not print a hardness figure. Test at the tap before sizing a water softener.
Does Clinton have lead service lines?
The village has published a service line inventory and lead plan updates and says lead lines were used only in the 1920s and 1930s. Homes from that era are the ones to check.
Where do I get a plumbing permit in Clinton?
From the village building inspector, (608) 931-6759, with forms to the clerk at 301 Cross Street. Review can take up to 14 days.
How old are the homes in Clinton?
Older than the county as a whole: a large share were built before 1940, according to the Census, so cast iron drains and galvanized supply pipe are common.
What does a plumber cost in Clinton?
National 2026 guides put plumbers at $45 to $200 an hour and a tank water heater at $881 to $1,826 installed. See the cost page.
Common jobs in Clinton
Nearby towns
All 7 town pages are on the service area page.
Plumbing in Clinton
Describe the problem and the street. A licensed plumber replies with a price, and no work starts until you agree to it.
Prices and the full service list are on the homepage for a plumber in Beloit.
