
Sump Pump Discharge Rules in Beloit and Stateline Towns
Updated
Get a free quote
A licensed plumber replies with a price. Nothing is booked until you say yes.
Rather talk? Call (608) 927-6750 or text us.
Short answer
Part of Sump Pump Installation.
Where a sump pump sends its water matters as much as the pump. A pump that works but empties into the wrong place can lead to a fine, a failed inspection or a backed-up sewer. A licensed plumber who handles sump pump installation plans the discharge first and the pit second. This guide sets out the state rule, where the local rules differ and what the work costs.
The state rule on clearwater
SPS 382.36(4)(b) says stormwater or clearwater piping may not connect to a sanitary drain system. The exception is a building served by a combined sewer, where one pipe carries both. The state table also limits clearwater discharge to a sanitary sewer to 50 gallons per day (SPS 382.36). A sump pump moving groundwater can easily exceed that in a single wet day, which is the whole point of the rule: clean water filling a sanitary line costs the treatment plant money and can push the sewer past capacity.
"Clearwater" means groundwater, roof water, foundation drain water and sump water. If it is not wastewater, it goes to the storm system, the yard or an approved drain, not the sewer.
What the City of Beloit says
The City of Beloit's own sump pump ordinance was not found in the research behind this page, so this guide cites the state rule only. Call the City before you plan a discharge. Planning and Building Services is at (608) 364-6700 (City permit page). The City's plumbing code requires a permit before any plumbing work, and a discharge change is plumbing work. Water Resources at (608) 364-2888 is the place to ask about a sewer connection (City sewer page).
Town of Beloit
The Town of Beloit is a separate municipality from the City and has its own clearwater ordinance. This guide does not quote it. Read it or call the Town before you plan the discharge, and do not assume the City's answer applies. The Town also runs its own sanitary sewer utility (Town of Beloit sewer page).
South Beloit, Rockton and Roscoe
Illinois towns follow Illinois rules, not the Wisconsin code. South Beloit requires a clearwater inspection form when a water account is transferred or opened. An Illinois licensed plumber does the inspection and the form goes in 10 days before closing (City of South Beloit clearwater form). If you are buying or selling in South Beloit, ask early so the date does not slip. For Rockton and Roscoe, call the village office and ask about discharge rules before you plan the pipe.
Where a sump pump may discharge
- Never: into a sanitary drain, a floor drain tied to the sanitary line or a sewer cleanout.
- Often allowed: to the yard, away from the foundation and off a neighbor's lot, or to a storm system where the municipality permits it.
- Check first: any discharge that reaches a street, sidewalk or storm inlet, since each town sets its own limits.
In winter, the discharge line can freeze and push water back into the pit. A plumber can add a freeze-resistant outlet. The frozen pipes guide covers cold-weather basics.
What sump pump work costs
| Job | Typical range | Notes |
|---|---|---|
| Replace a pump | $309 to $755 | Same pit, same discharge |
| New pump and pit | $800 to $3,000 | Pedestal and submersible types differ |
| Battery backup pump | $600 to $1,200 | Covers a power outage |
These come from national cost guides: replacement, new install and backup pumps. Local prices depend on the pit, the discharge run and the permit. The plumber cost page has the full list, and a written quote should say where the discharge ends.
Parts of the discharge system that fail
The pump gets the attention, but the discharge line is where many problems begin. A check valve on the discharge keeps water from running back into the pit after the pump stops. Without one, the pump cycles on and off more than it should. The pipe needs a steady slope away from the house and an outlet that will not clog with leaves, mud or ice.
A line that empties right at the foundation sends the water straight back to the pit. Many homeowners add an extension so the water lands well away from the wall. A plumber can also add a second outlet that opens if the first one freezes, which is useful in a Beloit winter. NOAA's normals count an average of 13.3 days a year at or below 0°F (NOAA climate normals).
Buying or selling a house with a sump pump
Sump pumps show up in home inspections and in the paperwork at closing. In South Beloit, the clearwater inspection form is part of that paperwork and the plumber must be licensed in Illinois. In Wisconsin towns, ask the municipality what it asks for at a sale. If the pump drains to a sanitary line, plan to fix that before a buyer or lender finds it. The sewer backup guide explains why clearwater in a sanitary line can cause trouble for a whole street.
Questions to ask the town or the City
- Where is a sump pump allowed to discharge on my lot?
- May the discharge reach a street, a storm inlet or a ditch?
- Is a permit needed to move or add a discharge line?
- Does a sale or a new water account trigger an inspection?
- Who must perform the inspection, and how far ahead must it be filed?
Write down the name of the person who answers and the date. If a town later says something different, that note helps. A plumber who works in the area will often know the answer, but the town is the one that enforces it.
Before you start
Walk the property and find where the water can go without reaching the sanitary system or a neighbor. Take a photo of the pit and the discharge line. Then call the City or Town and the plumber. Send the details to the quote form and mention whether the house now drains to the sanitary line.
Sources: Wis. Admin. Code SPS 382.36, clearwater and stormwater to sanitary drains; NOAA NCEI, 1991-2020 U.S. Climate Normals, Beloit WI (USC00470696); City of Beloit, Planning and Building Services permits; City of Beloit, Water Resources sewer services; Town of Beloit, sanitary sewer utility; City of South Beloit, clearwater inspection form; Angi, sump pump replacement cost; Angi, sump pump installation cost; Angi, battery backup sump pump cost
Want a price for your own house?
Call, text, or send the form. You get a price back before any work is scheduled.
Quick answers
Can a sump pump drain into the sewer in Wisconsin?
State code says stormwater or clearwater piping may not connect to a sanitary drain system, except where a combined sewer exists. Table 382.38-1 limits clearwater to a sanitary sewer to 50 gpd.
What is clearwater?
Clearwater is groundwater, roof water, foundation drain water and sump pump water that is not wastewater. It goes to a storm outlet or the yard, not to the sanitary sewer.
What are the sump pump rules in the City of Beloit?
The City's own sump pump ordinance was not found, so only the state rule is cited. Call Planning and Building Services at (608) 364-6700 and ask before you plan the discharge.
Does the Town of Beloit have a different rule?
The Town of Beloit is separate from the City and has its own clearwater ordinance. Ask the Town directly instead of relying on the City's answer.
What is South Beloit's clearwater inspection?
South Beloit requires a clearwater inspection form at account transfer or a new water account. An Illinois licensed plumber completes it and it is submitted 10 days before closing.
How much does a sump pump cost to replace?
Replacement typically runs $309 to $755, a new pump and pit $800 to $3,000 and a battery backup $600 to $1,200. See the cost page for details.
Want a plumber to look at it?
Describe the problem and the town. A licensed plumber replies with a price before any work starts.
Prices and the full service list are on the homepage for a plumber in Beloit.
